Untitled 1

Haytools


Forage harvesting lays the foundation for a successful livestock operation. The aim of any farmer is to create maximum quality at minimum cost. With pioneering spirit and innovative strength CLAAS delivers timely, effective and loss-free harvesting for farmers and custom operators.



COUGAR - Unfolding new possibilities up to 45 ft. (14 m)


CLAAS COUGAR Mowers: Nowadays more and more emphasis is being placed on the fast and efficient harvesting of grass silage coupled with high forage quality. An important factor involved in this is mowing at the right time. As there is an increasing tendency for forage harvesting to be outsourced, a high degree of mowing power is required.

CLAAS COUGAR - The entirely new self-propelled concept for a new dimension in high-performance mowing. Find out more about the COUGAR.

In 2006 a COUGAR in Eastern Germany recorded mowing more than 20,000 acres in one season. According to the farmer's internal stats, this was the combined acreage of 18,000 acres in hay & alfalfa and another 2,000 acres mulching corn stubble in the fall, with flail mowers attached instead of grass mowers. The COUGAR replaced two large mower combinations on this particular farm, making the operation more efficient and adding capacity.



Success with speedy disc mowing


CLAAS DISCO Mowers: The CLAAS DISCO disc mower range offers optimum ground following in all situations and a clean and fuel-saving cut. Either with or without conditioner, spreading or swathing, the DISCO offers impressive technology, quality and reliability! And with working width from 8.5 ft. (2.6 m) to 29' 10" (9.09 m), there is a DISCO mower for every farm.

CLAAS has established a new performance category in mowing design, with the new P-CUT cutterbar. No matter what the working width, this new generation of cutterbars is consistently found in all our disc mowers, from the 45' COUGAR, the world's largest mower, to the 8' DISCO 250.

Model Working width Front/Rear HP Requirement Conditioner
2650 Plus 8'6" (2.6 m) Rear 45 -
3050 Plus 9'10" (3.0 m) Rear 55 -
3050TC Plus 9'10" (3.0 m) Rear 70 Tine
3050TRC Plus 9'10" (3.0 m) Rear 70 Roller
3100F Plus 9'10"(3.0 m) Front 55 -
3100FC Plus 9'10" (3.0 m) Front 70 Tine
3100FRC Plus 9'10" (3.0 m) Front 70 Roller
3450 Plus 11'2" (3.4 m) Rear 60 -
3500TC Plus 11'2" (3.4 m) Rear 100 Tine
3500TRC Plus 11'2" (3.4 m) Rear 100 Roller
3900TC Plus 12'6" (3.6 m) Rear 100 Tine
8550C AS Plus 26'3" (8.0 m) Rear 210 Tine
8400RC Plus 26'3" - 27'3" (8.0-8.2 m) Rear 210 Roller
9100 Plus 29'3" (8.9 m) Rear 150 -
9100C Plus 29'3" (8.9 m) Rear 210 Tine
9300C Plus 29'3" - 29'10" (8.8-9.0 m) - - -


Spread evenly for accelerated drying


CLAAS VOLTO Tedders: Our objective is to limit drying times to a minimum and to guarantee high-quality forage. The CLAAS VOLTO range of tedders offers modern technology with suitable performance, quality and operating comfort.

3-Point Mounted Tedder
Model Working width Rotors Arms per Rotor
770 H 25'3" (8.20 m) 6 7
Trailed Tedders
Model Working width Rotors Arms per Rotor
52 T 17' (5.20 m) 4 6
75 T 24'6" (7.50 m) 6 6
870 T 28'6" (8.70 m) 8 6
1050 T 32'10" (10 m) 8 7
1320 T 42'6" (13 m) 10 7


Heavy duty is an understatement


CLAAS LINER Rakes: From the single rotor rake, dual rotor central or side discharger, to the four rotor large-scale rake, CLAAS has the perfect solution to master any challenge. Any farmer or custom operator will be able to find a LINER suitable for the following harvest machines from this wide range of rakes. This creates the ideal conditions for improved performance in the harvesting chain. Whether you work as a custom operator or on a farm with your own machinery, you want clean raking, even swathing, reliability and low maintenance costs. The CLAAS LINER can meet these demands.

Large-Scale Rakes
Model Working width Rotors
LINER 3500 32' - 41' (9.90 - 12.50 m) 4
LINER 4000 40' - 49'2" (12.20 - 15.00 m) 4
Dual Rotor Central Discharger
Model Working width Rotors
LINER 2600 20' - 22'4" (6.20 - 6.80 m) 2
LINER 2700 22.4' - 24'4" (6.80 - 7.40 m) 2
LINER 2800 24.4' - 27' (7.40 - 8.20 m) 2
LINER 2900 27' - 29'6" (8.00 - 9.00 m) 2
Dual Rotor Side Discharger
Model Working width Rotors
LINER 650 TWIN 19' - 20'6" (5.80 - 6.30 m) 2
LINER 750 TWIN 24' - 25'7" (7.30 - 7.79 m) 2
LINER 1650 TWIN 22.3' - 25'11" (6.80 - 7.90 m) 2
LINER 1750 TWIN 26'3" (8.00 m) 2
Single Rotor Rake
Model Working width Rotors
LINER 350 11'6" (3.50 m) 1
LINER 350 T 11'6" (3.50 m) 1
LINER 470 15' (4.60 m) 1
LINER 470 T 15' (4.60 m) 1